Pack Ski touring MAJESTY SUPERWOLF Carbon Mixed + Binding - 2025

Assets :

• Virtually indestructible fastener, high performance on descent
• TÜV-certified safety device
• High climbing comfort thanks to three available travel positions

Technical specifications :

• DIN : 4 - 10
• Weight: 599g
• Dynafit's patented rotational stop absorbs shocks to bindings and skis during dynamic, high-speed descents.
• The release function is even more reliable, greatly reducing the risk of accidental release.
• The longitudinal pressure of the binding, with 10 mm of travel, maintains release stability even when the ski is strongly flexed
• The heel unit, with its high-performance bayonet locking system, ensures highly efficient transmission of forces from the binding to the ski, for greater responsiveness and power on descents
• Step-In Side Towers make it 30% easier to put on the ski stop, so you're up and running in no time.
• The ski stop locks automatically when the binding is in the on position, for smooth operation in the terrain
• The system features a 45 mm longitudinal adjustment range, for adaptation to different sole lengths
• Lifetime warranty

Assets :

• Absolute lightness
• A sure bet for mountain adventures

Technical features :

• PINTECH for greater freedom in the mountains
• Lightweight: optimized design for ultra-light bindings
• Weight: 740g per pair
• DIN: 4-10
• 3 climbing wedges

Advantages:

• Lightweight
• Ergonomic climbing wedge
• Maximum performance

Technical features:

• CLIMBING AIDS: The climbing wedge offers two positions at 7° and 13°, easily adjustable with the ski pole, even in an unstable balance position
• ANTI-ICE PADS: Anti-icepads on the base of the front stop and heel pad to prevent ice from forming in critical areas
• ALPINIST HEEL: Adjustable side release with different DIN options and a 15 mm heel adjustment range. Offers three walking modes with hot-forged aluminum climbing aid
• ACTIVE LENGTH: Active length compensation in the heel cup that allows the heel to move back up to 4 mm when the ski is flexed
• ISI TOE: Enlarged contact zone for the sole of the boot when the foot is placed. The toe cap therefore engages with much less force

Details:

• Weight: 270g
• DIN: 3-8
• Climbing wedges: 0°, 5°, 9

Ultra-light touring binding for easy donning and optimum control in high alpine conditions

The Alpinist binding, weighing just 245 g without brake, is ideal for experienced touring skiers. Its lightweight construction enables active length compensation without affecting ski flex.

The carbon-reinforced ISI front stop facilitates fitting with a wide support surface and guides. The heel piece offers adjustable ascent angles and optimal control thanks to a wide drilling point.

Benefits

• Ultra-light binding (245 g) with active length compensation for optimum ski flex.
• Carbon-reinforced ISI front stop for easy, precise fitting, even in high alpine conditions.
• Heel unit with adjustable ascent wedges (0°, 5°, 9°) for rapid transition between ascent and descent.

Technical specifications

• Ultra-light weight: 245 g without brake
• Active length compensation without compromising ski flex
• High-rigidity, carbon-reinforced ISI front stop for easy shoeing
• Large support surface with boot guide for automatic, precise insertion
• Optimized locking lever kinematics for easy insert locking
• Heel cup with climbing wedges offering 0°, 5° and 9° angles
• Wide drilling point (38 mm) for perfect transmission of support to edges

High-performance ski bindings for precise, safe descents

The KINGPIN 10 binding, light and comfortable for ascents, powerful and precise for descents, adapts to skis from 75 to 100 mm thanks to its 100 mm ski stop. It's ideal for lovers of virgin slopes.

The innovative KINGPIN 10 offers optimum power transmission with a wrap-around heel pad and energy-absorbing front stop. Easy to use, it switches quickly from ski to rando mode.

Benefits

• Light and comfortable on ascents, powerful and precise on descents thanks to its 100 mm ski stop.
• Ideal power transmission with an innovative heel unit for optimum support and precision.
• Easy to use, with fast, intuitive switching between ski and touring modes.

Technical data

• DIN value: 5 - 10
• Ski stop: 100 mm
• Height: 21.5 mm
• Front stop: Kingpin Pintech toe
• Step-in: Kingpin heel
• Integrated climbing wedges (0°, 7°, and 13°)
• Integrated crampon support
• Sole length adjustment: 35 mm

Advantages:

• Lightweight
• Ergonomic climbing wedge
• Maximum performance

Technical features:

• CLIMBING AIDS: The climbing wedge offers two positions at 7° and 13°, easily adjustable with the ski pole, even in an unstable balance position
• ANTI-ICE PADS: Anti-icepads on the base of the front stop and heel pad to prevent ice from forming in critical areas
• ALPINIST HEEL: Adjustable side release with different DIN options and a 15 mm heel adjustment range. Offers three walking modes with hot-forged aluminum climbing aid
• ACTIVE LENGTH: Active length compensation in the heel cup that allows the heel to move back up to 4 mm when the ski is flexed
• ISI TOE: Enlarged contact zone for the sole of the boot when the foot is placed. The toe cap therefore engages with much less force

Details:

• Weight: 270g
• DIN: 4-11
• Recommended skier weight: max 110kg
• Climbing wedges: 0°, 5°, 9

Ski touring binding with DIN adjustment and 90mm ski stop width

The Marker Cruise 12 90mm Black Green ski binding is specially designed for touring and is compatible with standard-compliant ski boots. It offers a DIN adjustment range from 6 to 12, ensuring maximum safety for experienced skiers.

With a stop ski width of 90 mm, this binding is ideal for skis up to 90 mm in size. So it's an appropriate choice for demanding skiers looking for a quality binding for their adventures.

Features :

• Designed specifically for touring, offering optimum performance.
• Compatible with ski boots with standard-compliant inserts for maximum safety.
• 90 mm ski stop width, ideal for skis up to 90 mm.

Technical data :

• DIN : 6-12
• Brake width: 90mm
• Compatible with ski boots with standard-compliant inserts
• Sole standard: boots with Low Tech inserts
• Pair weight: 0.95 kg

Uncompromising combination of advanced Radical Speed ​​and special expedition without lateral release. Very light with a weight of only 202g.

Advantages:

• Ultra light
• Robust
• High performance

Technical features:

• Fully adjustable release (FAR)
• Ultra-light
• Carbon material
• Ice-breaking needles
• Knife attachment
• Optional adjustment plate
• Optional ski-brakes

• Weight 125g

• Lock Type eManual
• DIN 5-10
• Material:
• Aluminum
• Carbon
• High Tech Synthetic
• Made in Germany

Advantages:

• Lightweight
• Ergonomic climbing wedge
• Maximum performance

Technical features:

• CLIMBING AIDS: The climbing wedge offers two positions at 7° and 13°, easily adjustable with the ski pole, even in an unstable balance position
• ANTI-ICE PADS: Anti-icepads on the base of the front stop and heel pad to prevent ice from forming in critical areas
• ALPINIST HEEL: Adjustable side release with different DIN options and a 15 mm heel adjustment range. Offers three walking modes with hot-forged aluminum climbing aid
• ACTIVE LENGTH: Active length compensation in the heel cup that allows the heel to move back up to 4 mm when the ski is flexed
• ISI TOE: Enlarged contact zone for the sole of the boot when the foot is placed. The toe cap therefore engages with much less force

Details:

• Weight: 270g
• DIN: 6-12
• Recommended skier weight: max 110kg
• Climbing wedges: 0°, 5°, 9

Advantages:

• Lightweight
• Ergonomic climbing wedge
• Maximum performance

Technical features:

• CLIMBING AIDS: The climbing wedge offers two positions at 7° and 13°, easily adjustable with the ski pole, even in an unstable balance position
• XXL POWER TRANSMISSION: The ultra-wide power transmitters in the heel piece have a reduced weight to ensure minimal friction and a perfect heel call
• KINGPIN HEEL: provides ample contact points with the sole to ensure direct power transfer without the dissipation that is typically typical of alpine ski bindings
• CARBON REINFORCEMENTS: carbon fiber reinforced material for improved stiffness and exceptional lightness
• VERTICAL AND LATERAL ADJUSTMENT FUNCTION: individually adjustable vertical and lateral release for improved release function
• EASY SHOE: Extended contact area for the sole of the shoe when putting on the foot. This means the toe cap engages with much less force

Details:

• Weight: 695g
• DIN: 5-10
• Recommended skier weight: 30-105 kg
• Brake width: 100-125mm
• Climbing wedges: 0°, 7°, 13

Hybrid Alpine/Randonne Binding for Extreme Freeriders with Low Tech and Alpine Operation

The Duke Pt 11 from Marker is a hybrid alpine/hike binding designed for extreme freeriders. It offers both low-tech and alpine operation, allowing you to use an insert binding on the way up and the alpine mode on the way down. It features a Ride & Hike front stop for precise safety release and an AFD anti-friction system for lateral release in the event of a fall.

The binding is convertible for easy-walking mode, with a weight saving of 300g when climbing. It is compatible with alpine, touring and GripWalk insoles. It also incorporates technologies such as AFD Stainless Steel, Hollow Linkage Heel, Gripwalk, Ride & Hike, Anti-Ice Rail, Hollow Linkage 2 Heel and Sole.ID for optimum performance.

Benefits:

• The Duke PT 11 offers hybrid operation, combining the advantages of an insert binding for ascents and alpine mode for descents.
• It features advanced technologies such as the AFD anti-friction system for precise, secure release, and the Lock & Walk multifunction brake for optimal control.
• It is fully compatible with all ski soles, offering great flexibility and adaptability to the user.

Technical specifications:

• Brake width: 100mm
• DIN: 3-11
• Recommended skier weight: between 30 and 110 kg
• Hybrid alpine/hiking binding
• Low-tech and alpine operation
• Ride & Hike front stop for precise safety release
• AFD anti-friction system for lateral release
• Easy-to-activate walk mode
• Convertible front stop saves weight when climbing
• Multifunctional Lock & Walk brake with 10° ascent wedge
• Compatible with alpine, touring or GripWalk insoles
• AFD stainless steel technologies, Hollow Linkage heel lift, Gripwalk, Ride & Hike, Anti-ice rail, Hollow Linkage 2 heel lift, and Sole.ID
• Pair weight: 1.7kg for ascent // 2.3kg for descent

Advantages:

• Lightweight
• Ergonomic climbing wedge
• Maximum performance

Technical features:

• CLIMBING AIDS: The climbing wedge offers two positions at 7° and 13°, easily adjustable with the ski pole, even in an unstable balance position
• XXL POWER TRANSMISSION: the ultra-wide power transmitters in the heel piece have a reduced weight to ensure minimal friction and a perfect heel call
• CARBON REINFORCEMENTS: The front stop and heel pad made of carbon reinforced materials offer increased strength and reduced weight
• VERTICAL AND LATERAL ADJUSTMENT FUNCTION: individually adjustable vertical and lateral release for better release function
• EASY SHOE: Extended contact area for the sole of the shoe when the foot is placed. This means the toe cap engages with much less force

Details:

• Weight: 655g
• DIN: 5-12
• Recommended skier weight: less than 120 kg
• Brake width: 75-100mm
• Climbing wedges: 0°, 7°, 13

Features :

• Ideal for ski touring
• Versatility
• Lightweight

Technical features :

• DIN: 3 - 11
• Weight: 1580g per pair
• Interface: plate
• Sole standard: compatible with alpine and hiking soles
• Size S-M: 260 to 315mm

Weight : 1790g
Z-Din : 3-10 (skier between 30 and 100 kg)
Stop Skis : no
Adjustment of fixing : 260-350

Hybrid Alpine/Randonne Binding for Extreme Freeriders with Low Tech and Alpine Operation

The Duke Pt 11 from Marker is a hybrid alpine/hike binding designed for extreme freeriders. It offers both low-tech and alpine operation, allowing you to use an insert binding on the way up and the alpine mode on the way down. It features a Ride & Hike front stop for precise safety release and an AFD anti-friction system for lateral release in the event of a fall.

The binding is convertible for easy-walking mode, with a weight saving of 300g when climbing. It is compatible with alpine, touring and GripWalk ski soles. It also incorporates technologies such as AFD stainless steel, Hollow Linkage heel lift, Gripwalk, Ride & Hike, anti-ice rail, Hollow Linkage 2 heel lift and Sole.ID for optimum performance.

Benefits:

• The Duke PT 11 offers hybrid operation, combining the advantages of an insert binding for ascents and alpine mode for descents.
• It features advanced technologies such as the AFD anti-friction system for precise, secure release, and the Lock & Walk multifunction brake for optimal control.
• It is fully compatible with all ski soles, offering great flexibility and adaptability to the user.

Technical specifications:

• Brake width: 125mm
• DIN: 3-11
• Recommended skier weight: between 30 and 110 kg
• Hybrid alpine/hiking binding
• Low-tech and alpine operation
• Ride & Hike front stop for precise safety release
• AFD anti-friction system for lateral release
• Easy-to-activate walk mode
• Convertible front stop saves weight when climbing
• Multifunctional Lock & Walk brake with 10° ascent wedge
• Compatible with alpine, touring or GripWalk insoles
• AFD stainless steel technologies, Hollow Linkage heel lift, Gripwalk, Ride & Hike, Anti-ice rail, Hollow Linkage 2 heel lift, and Sole.ID
• Pair weight: 1.7kg for ascent // 2.3kg for descent

High-performance bindings to conquer demanding ski touring terrain

The Vipec Evo 12 ski binding from Fritschi combines power and safety, offering optimal downhill control and reliable release for easy navigation in challenging conditions.

With advanced technologies such as lateral release and simplified donning, the Vipec Evo 12 provides comfort and protection, ideal for tourers tackling demanding terrain.

Features

• Optimal performance and safety thanks to adjustable side release and fixed heel cup for exceptional power transfer.
• Simplified handling with easy donning and changeover to walk mode without bending down, ideal for demanding terrain.
• Climb emergency release system for confident riding, minimizing the risk of accidents.

Technical data

• DIN: 4-12
• Weight: 1000 g (complete mounting)
• Climbing wedge: Yes
• Lateral front release with 13 mm elasticity
• Rigid, non-rotating gaiter
• Switch to walking mode with pole
• Bindings delivered with ski stops mounted

Features :

• robust
• Reliable
• Lightweight

Technical features :

• EASY ENTRY SYSTEM®: a new geometry of the toe hook elements that makes fitting extremely simple, immediate and safe with all the latest generation of technical footwear, even with worn soles.
• MONOLINK TECHNOLOGY 1.0®: one of the two stop arms is fixed, reducing weight by around 2.5 grams per toe and improving rigidity. Less pressure on the locking system for improved performance and comfort.
• A simple competition wedge on the heel piece allows 3 walking modes: FLAT, +35 mm and +44 mm, selectable by turning the heel piece 180°.
• Materials: Alu 7075, Stainless steel, POM
• Release: 10
• Climbing wedges: Flat, +35, +44 mm
• Adjustment: 30 mm
• Weight: 145g

high-performance bindings for conquering demanding ski touring terrain

The Vipec Evo 12 ski binding from Fritschi combines power and safety, offering optimal downhill control and reliable release for easy navigation in challenging conditions.

With advanced technologies such as lateral release and simplified donning, the Vipec Evo 12 provides comfort and protection, ideal for tourers tackling demanding terrain.

Features

• Optimal performance and safety thanks to adjustable side release and fixed heel cup for exceptional power transfer.
• Simplified handling with easy donning and changeover to walk mode without bending down, ideal for demanding terrain.
• Climb emergency release system for confident riding, minimizing the risk of accidents.

Technical data

• DIN: 4-12
• Weight: 1000 g (complete mounting)
• Climbing wedge: Yes
• Lateral front release with 13 mm elasticity
• Rigid, non-rotating gaiter
• Switch to walking mode with pole
• Bindings delivered with ski stops mounted

High-performance ski bindings for total freedom on the slopes

The Freeraider 15 EVO, an innovative ski binding, stands out for its high release values and freedom of expression. Thanks to the Freeride spacer and EVO brake system, it ensures optimum performance on both ascents and descents. Its revolutionary stop allows precise adjustment of releases, guaranteeing safety and power.

Designed for durability with robust materials like 7075 aluminum, this lightweight binding (395g) offers a release range of 7-15. It adapts to wide skis (90-120mm) and skiers weighing between 60-120kg, while facilitating adjustments thanks to its flexible system.

Benefits

• Total freedom: Adjustable release for optimum safety and maximum expression of your power.
• Performance through lightness: Lightweight design for increased speed without compromising stability.
• Exceptional durability: High-quality materials to withstand the rigors of ski touring.

Technical specifications

• Weight: 395 grams
• Materials: Alu 7075, POM, Stainless steel
• Trigger range: 7-15
• 108mm compatible
• Walking modes: Flat | +35.5mm | +49mm
• Boot size adjustment: 25 mm
• Elastic heel stroke: 14mm
• Toe release adjustment: Yes
• Ski stop system: EVO
• Ideal fit - Ski width: 90 - 120mm
• Best fit - Ski weight: 1300 - 2000g
• Ideal match - Skier weight: 60 - 120kg

Ultra-light binding for optimum ski touring performance

The Revolution World Cup Lightweight binding from ATK, weighing just 105 grams, is designed to optimize speed in ski touring. Made primarily of 7075 aluminum with titanium components, it offers exceptional lightness and durability, ideal for competitions and thrilling descents.

Featuring innovative systems such as Snowpack Proof and Easy Entry System, this binding ensures optimal performance without snow accumulation. True to its mantra of "performance through lightness", ATK continues to offer reliable technical solutions for demanding ski mountaineers.

Benefits

• Revolutionary lightness: At just 105 grams, the Revolution World Cup Lightweight from ATK propels you to victory by reducing weight for optimum speed.
• Exceptional durability: Made from high-quality materials such as 7075 aluminum and titanium, this binding withstands the rigors of ski touring.
• Advanced technology: Take advantage of the Snowpack Proof system and Easy Entry System for smooth, hassle-free performance on the slopes.

Technical specifications

• Weight: 105 grams
• Materials: Aluminium 7075, POM, Titanium
• Snowpack Proof system to prevent snow accumulation
• Easy Entry System for fast boot entry
• Rolling in System to protect the U-Spring
• No ski stops
• Ideal fit: Ski width 60-82mm, ski weight <750g, skier weight 40-60kg

Ultra-lightweight binding for unrivalled speed performance in ski mountaineering

The Revolution Brake World Cup Lightweight is an ultralight 122-gram binding, ideal for skiers looking to maximize their speed. Made from high-quality materials such as 7075 aluminum and titanium, it offers durability and performance, even in the most demanding conditions.

Featuring an innovative system to prevent snow accumulation and intuitive ski stops, this binding ensures safety and efficiency. True to its mantra of "performance through lightness", ATK continues to innovate to meet the needs of ski mountaineers.

Highlights

• Revolutionary lightness: just 122 grams, optimized for unrivalled speed performance.
• Exceptional durability: high-end materials and robust design to withstand the rigors of ski-mountaineering.
• Innovative system: Intuitive ski stops and Snowpack Proof for fast, effortless transitions.

Technical specifications

• Weight: 120 grams
• Materials: Aluminium 7075, POM, Titanium
• Snowpack Proof system to prevent snow accumulation
• Climbing hardness variator to adjust stiffness
• Intuitive RACE ski brake management system
• Solid aluminum brake caps for lightness and durability
• Release range: Fixed stroke adjustment
• Boot size adjustment: None
• Elastic heel stroke: None
• Toe piece release adjustment: No
• Ideal ski fit: Width 60-70mm, Weight <750g
• Recommended skier weight: 40-60kg

Touring ski bindings for beginners: performance and lightness at your fingertips

The Candy 5 binding from ATK is ideal for beginners and light users, offering comfort, control and reliability. Its fiberglass composite tip prevents snow build-up, guaranteeing optimal performance.

With the patented Cam Release system and Snowpack Proof, the Candy 5 ensures easy donning and great durability. Perfect for those looking for lightness and performance in ski-mountaineering.

Benefits

• Lightweight, durable design, ideal for beginner touring skiers.
• Cam Release and Snowpack Proof systems for precise control and effortless use.
• Flexible adjustment with up to 50 mm of length adjustment for optimum comfort.

Technical features

• Fiberglass composite toe cap to prevent snow debris.
• Cam Release system for easy donning and torsional rigidity.
• Elastic response system for precise release.
• Length adjustment up to 50 mm.
• Adjustable lateral and vertical release values.
• 91mm compatible
• Snowpack Proof system to prevent snow accumulation.
• Easy Entry System for quick and easy entry.
• Integrated, removable ramp support.

Ultra-light touring binding for unrivalled speed performance

The Revolution Brake World Cup binding is designed to optimize ski touring performance thanks to its light weight and ski stop system. Made primarily from 7075 aluminum, it incorporates titanium and POM components to reduce weight while ensuring durability and reliability. Its innovative design prevents the accumulation of snow under moving parts, guaranteeing a fluid experience.

ATK, true to its mantra "performance through lightness", has developed this binding to meet the needs of ski mountaineers seeking speed and efficiency. Weighing just 120 grams, it is ideally suited to skis 60-70mm wide and skiers weighing between 55-75kg. This symphony of technology ensures rapid transitions without compromising stability.

Benefits

• Extreme lightness: Designed in 7075 aluminum and titanium, the binding weighs just 120g, ideal for unrivalled speed performance.
• Revolutionary braking system: Intuitive ski-stop management with no extra gestures, guaranteeing fast, fluid transitions.
• Exceptional durability: high-end materials and robust construction to withstand the rigors of ski touring.

Technical specifications

• Weight: 120 grams
• Materials: Alu 7075, POM, Titanium
• Snowpack Proof system to prevent accumulation of snow and ice
• Climbing hardness variator to adjust locking rigidity
• Intuitive ski-stop management system with no additional gestures required
• Rolling in System mechanism for a smoother fit
• Solid aluminum brake caps for less plastic
• Ski braking system: RACE
• Ideal fit: Ski width 60-70mm, Ski weight <750g, Skier weight 55-75kg

Ski touring bindings for easy fitting and optimum safety

ATK Crest 10 touring ski bindings include ski stops, up to 10 DIN release adjustment and three wedge positions. They can be adapted to two boot sizes thanks to a sliding plate.

The ELASTIC RESPONSE system prevents unintentional release, while the Easy Entry System makes it easy to put them on with any sole. Designed for experienced skiers, they are suitable for both men and women.

Benefits

• Hardness adjustment up to 10 DIN for optimum safety.
• Easy Entry System for easy fitting with all insoles.
• Elastic Response System to prevent accidental release.

Technical data

• Hardness adjustment up to 10 DIN
• 3 wedge positions
• Integrated ski stops
• Adjustment range: 20 mm (2 sizes)
• ELASTIC RESPONSE SYSTEM to prevent accidental release
• Easy Entry System for easy donning and doffing
• 102mm compatibility
• Compatible with all insoles
• Gender: Unisex
• Level: Advanced

Benefits:

• Lightweight
• Downhill performance
• Resistant

Technical features:

• Single screw for full adjustment of vertical and lateral release
• Simple, minimal boot stop for efficient steering
• Streamlined shape maintains optimal performance with minimal weight
• QuickFlick heel pads are easy to handle with your ski pole
• Heel turret can be rotated in either direction to turn them
• Single tool simplicity with all binding brackets and adjustments (Pozi 3)
• 30mm heel length adjustment to fine tune each configuration
• Toe jaw strength removes excess snow with each closure
• Anti-snow features built into insert designs
• Optimal insert elasticity for maximum energy absorption and minimal pre-release
• 10mm forward pressure range in the heel to maintain consistent release
• Wide freeride support transfers power to the ski and provides tear resistance
• Wide center turret support and a wrap-around metal base transfer power and precision to the ski
• Optional extra brake is easy to install/uninstall
• Compatible with the ION Crampon for icy climbs
• DIN 3 to 9
• Weight: 358g without brakes

Lightweight and Versatile Hiking Binding: Comfort, Safety and Adaptability for an Unmatched Mountain Experience

The PLUM PIKA is a lightweight binding with adjustable front and side releases. It is ideal for hikers looking for a complete binding with various options such as adjustable release, easy-to-handle climbing wedges, removable stopper, 20 mm adjustment rail and removable knife holder.

The PIKA uses PLUM "Too easy" technology for rapid donning and doffing. Its versatility is enhanced by the possibility of replacing the heel support with a stopper. As an option, a lightweight, easy-to-handle removable stopper is available in 4 widths. The binding is made of 7075 aluminum with a hardened steel front insert and a POM plastic heel retainer body.

*The offer is valid from 15/09/2023 to 31/01/2024, according to the brand's conditions, by following this link: Conditions prime à la fixe.

The form is available here : Information form

Please note that the offer is valid directly with the brand PLUM for the purchase of a binding at Alpinstore. All requests for reimbursement of the fixed price premium must be made directly via the brand PLUM.

Benefits

• The PLUM PIKA binding offers front and side release adjustment, for optimum safety on your hikes.
• Featuring PLUM "Too easy" technology, the PIKA is quick and easy to put on, making your moves smoother.
• The PIKA is extremely versatile, with options such as a removable stopper, 20 mm adjustment rail and removable knife holder.

Technical specifications

• Lightweight fixture with front and side release adjustment
• 2 positions for easy-to-handle climbing wedges (0 - 50 mm)
• Removable stopper and 20 mm adjustment rail (approx. 3 sizes)
• Removable knife holder and PLUM "Too easy" technology for quick donning and doffing
• Removable stopper option available in 4 widths (80, 90, 100 and 110mm)
• 7075 aluminum construction, hardened steel front insert, POM plastic heel retainer body

Freeride and touring bindings for ultimate performance and versatility

Duke PT 13 bindings, with a DIN range of 4 to 13, combine the performance of a Griffon with the comfort of a pin binding. The innovative Ride & Hike system makes walking easier.

The Lock & Walk mechanism automatically locks the brakes and offers a 10° climbing aid. Compatible with alpine, touring and GripWalk boots, they are ideal for freeride and freetour.

Benefits

• Exceptional freeride and freetour performance thanks to Inter Pivot 3 technology and the Ride & Hike system.
• Compatible with Alpine, GripWalk and touring boots for maximum versatility.
• Optimum safety with TÜV approval and adjustable weight for light ascents (1000g) and stable descents (1300g).

Technical specifications

• Size: 125MM, 100MM
• Highlights: Duke PT
• Age: Adult
• Height without ski: 24 mm
• AFD glide plate: Stainless steel
• Toe system: Ride & Hike
• Walking modes: 0°;10
• Heel adjustment range: 60 mm
• TÜV certified: Yes
• Binding weight: - Uphill:1000g - Downhill:1300g
• DIN/ISO range: DIN4.0-13.0
• Heel technology: Inter Pivot3
• Recommended skier weight:<120kg
• Ideal for: Freeride, Freetour
• Collection: Royal Family
• Boot type: Alpine, GripWalk
• Boot sole range:240mm-360mm
• Brake width:125mm

• 100% French manufacturing
• Optimized fit
• Easy grip

• PLUM "Too facile" technology (tightened inserts) provides optimized fit, while locking is facilitated by the roller tongue.
• Completely new design, designed for quick donning and doffing during handling.
• Front release: adjustable from 3.5 to 7
• Side release: adjustable from 3.5 to 7
• 3 wedge heights (0- 59-79 mm)
• Adjustment rail: 30mm
• Removable knife holders
• Solid-cut 7075 aluminum construction
• Weight: 670g or 335g per foot
• Skier weight: between 35kg and 70kg

Robust Touring Binding with Wide Frame for Powerful Skiers

The F12 TOUR EPF from Marker is a solid touring binding with high DIN adjustment and the advantages of a wider EPF frame. It allows you to control the widest touring skis on any terrain, thanks to improved power transmission.

It's ideal for powerful touring skiers looking for safety. Features include Backcountry technology, stainless steel AFD, Triple Pivot Light stop and Hollow Linkage heel retainer for optimum support.

Benefits:

• Robustness and high DIN adjustment for optimum control on all terrains, even with the widest touring skis.
• Backcountry technology for rapid transition from ascent to descent, and improved balance thanks to the 40 mm rearward shift of the binding in BC mode.
• Triple Pivot Light and Hollow Linkage for precise release, optimum support and maximum torsional stiffness, without unnecessary weight.

Technical data :

• DIN : 4-12
• Recommended rider weight: < 120 kg
• Brake width: 110mm
• Base length S: 265-325mm
• EPF - Extended Power frame: incredible power transfer in all situations.
• Climbing wedges integrated into the bindings allow you to alternate quickly between ascending and descending. The climbing wedge can be set to 7° or 13°. A 40 mm backward shift of the binding in BC mode ensures better balance and easier conversions.
• AFD stainless steel: all Marker bindings feature a movable AFD (Anti Friction Device) and guarantee the highest precision release, virtually unaffected by dirt, snow or ice.
• Triple Pivot Light: particularly compact, with a horizontally mounted spring. The combination of anti-friction plate and anti-friction elements integrated into the sole supports ensures particularly precise release behavior.
• Hollow Linkage heel retainer: this heel retainer is designed to guarantee optimum support for all types of sole, whether hiking or alpine.
• Pair weight: 2.36 kg

Advantages:

• Lightweight
• Ergonomic climbing wedge
• Maximum performance

Technical features:

• CLIMBING AIDS: The climbing wedge offers two positions at 7° and 13°, easily adjustable with the ski pole, even in an unstable balance position
• XXL POWER TRANSMISSION: The ultra-wide power transmitters in the heel piece have a reduced weight to ensure minimal friction and a perfect heel call
• KINGPIN HEEL: provides ample contact points with the sole to ensure direct power transfer without the dissipation that is typically typical of alpine ski bindings
• CARBON REINFORCEMENTS: carbon fiber reinforced material for improved stiffness and exceptional lightness
• VERTICAL AND LATERAL ADJUSTMENT FUNCTION: individually adjustable vertical and lateral release for improved release function
• EASY SHOE: Extended contact area for the sole of the shoe when putting on the foot. This means the toe cap engages with much less force

Details:

• Weight: 715g
• DIN: 6-13
• Recommended skier weight: less than 120 kg
• Brake width: 100-125mm
• Climbing wedges: 0°, 7°, 13

Transform Your Skiing Experience with a Versatile, Secure Binding Designed for Touring, Piste and Freeride

The GUIDE 12 is a high-performance, versatile ski binding for skiers weighing over 50 kg. It offers an adjustable release from 5.5 to 12, for safe use in touring, piste and freeride skiing. It is equipped with PLUM "Too easy" technology for quick donning, a 30 mm adjustment rail, and 3 wedge positions.

It can be fitted with PLUM knives of different widths thanks to its integrated supports. Available in black, it comes with a 10-year warranty. Its sturdy construction includes 7075 aluminum, a hardened steel front insert and a POM plastic heel retainer body.

*The offer is valid from 09/15/2023 to 01/31/2024, according to the brand's conditions, by following this link: Conditions prime à la fixe.

The form is available here : Information form

Please note that the offer is valid directly with the brand PLUM for the purchase of a binding at Alpinstore. All requests for reimbursement of the fixed price premium must be made directly via the brand PLUM.

Benefits

• High-performance and versatile, the GUIDE 12 is ideal for skiers from 50 kg upwards, offering an adjustable release for safe use in touring, on-piste or freeride skiing.
• Featuring PLUM "Too easy" technology for quick donning, a 30 mm adjustment rail and 3 wedge positions, it offers a multitude of options to suit your needs.
• The GUIDE 12 is durable and reliable, with a 10-year warranty, and is available in black to match your style.

Technical specifications

• High-performance, versatile and intuitive, ideal for skiers from 50 kg upwards
• Adjustable release from 5.5 to 12 in side and front for safe use
• PLUM "Too easy" technology for quick donning and doffing
• 30 mm adjustment rail, allowing 4 to 5 size adjustments
• 3 wedge positions (0-59-84 mm) for maximum adaptability
• Compatible with PLUM knives in widths of 80, 90, 100, 110 and 120 mm
• Available in black
• 10-year warranty for peace of mind
• Robust 7075 aluminum construction with hardened steel front insert and POM plastic heel holder body

Benefits:

• Lightweight
• Safety
• Easy to use

Technical features:

• Radically different. Secure hold on descents without jamming, with progressive force transfer and reliable release.

• Lightweight, easy to put on and easy to handle, the Xenic 10 is an eminently agile companion for ski touring on all types of terrain. The innovative stop with horizontally shifting pin levers provides a secure hold at the front. At the rear, the extra-wide heel support ensures precise ski control. Downhill, the 10 mm longitudinal flex compensation ensures reliable release at the set value. These features are also ideal for beginners.
• The Xenic can now easily be fitted with boots with Grip-Walk soles.
• With a DIN adjustment range from 4 to 10, the Xenic 10 offers optimum safety even for very light hikers.
• 99% of all parts are made in Switzerland and assembled in Reichenbach to form a high-quality product.
• DIN Xenic 10 4 - 10
• Ski width > 70 mm

• Sold without ski stop

• Horizontally translating pin levers for secure hold on descent without jamming Heel unit with extra-wide support for direct force transfer
• Reliable release with 10 mm longitudinal compensation for ski flexion
• Front and side releases can be adjusted separately and continuously
• Sophisticated technology for easy operation without compromise
• Sophisticated technology for easy operation without compromise
• Extra-large stop and pedal for easy on/off

Advantages:

• Lightweight
• Ergonomic climbing wedge
• Maximum performance

Technical features:

• CLIMBING AIDS: The climbing wedge offers two positions at 7° and 13°, easily adjustable with the ski pole, even in an unstable balance position
• XXL POWER TRANSMISSION: the ultra-wide power transmitters in the heel piece have a reduced weight to ensure minimal friction and a perfect heel call
• CARBON REINFORCEMENTS: The front stop and heel pad made of carbon reinforced materials offer increased strength and reduced weight
• VERTICAL AND LATERAL ADJUSTMENT FUNCTION: individually adjustable vertical and lateral release for better release function
• EASY SHOE: Extended contact area for the sole of the shoe when the foot is placed. This means the toe cap engages with much less force

Details:

• Weight: 655g
• DIN: 5-12
• Recommended skier weight: less than 120 kg
• Brake width: 100-125mm
• Climbing wedges: 0°, 7°, 13

Benefits:

• Lightweight
• Safety
• Easy to use

Technical specifications :

• DIN Xenic 7 : 3 - 7
• Ski width: >70 mm
• Weight: 280g / piece without ski stop
• Horizontally translating pin levers for secure hold on descent without jamming Heel piece with extra-wide support for direct force transfer
• Reliable release with 10 mm longitudinal compensation for ski flexion
• Front and side releases can be adjusted separately and continuously
• Sophisticated technology for easy operation without compromise
• Sophisticated technology for easy operation without compromise
• Extra-large stop and pedal for easy on/off

Freerando ski binding, compatible with GW, Alpine and Rando boot standards, with DIN adjustment and 90mm ski stop.

The Marker F5 Jr Tour 90mm ski binding is the freerando product of choice, compatible with Grip Walk (GW), Alpine and Rando ski boots. Its adjustment system offers a DIN range from 1.5 to 5, ensuring stability and safety, and features a 90mm ski stop, ideal for touring skis of the same width. The F5 Jr Tour 90mm binding also has an adjustment range from 235mm to 300mm.

Benefits :

• Adaptability to several ski boot standards (Grip Walk, Alpine, Rando).
• DIN adjustment range from 1.5 to 5 for optimum stability and safety.
• Equipped with a 90 mm ski stop, ideal for touring skis of the same width.

Technical specifications:

• Suitable for Grip Walk (GW), Alpine and Rando ski boot standards
• DIN: from 1.5 to 5 for optimum stability and safety
• Equipped with a 90 mm ski stop
• Optimal performance with touring skis
• Adjustment range from 235mm to 300mm

Transform Your Ski Experience with Our Innovative, Ultra-Resistant Ski Bindings

The KARIBOU 12 STOPPER is an innovative ski binding offering optimum comfort on the ascent and excellent skiability on the descent. It features an automatic ski stop, pole-operated wedges, a wide baseplate, a flat ski position and high release values for optimum performance on tour or in the resort.

It incorporates a patented system offering a total elasticity of 12mm to improve ski flexing under heavy compression. This system ensures a better weight-tip/weight-cup balance, a better distribution of elasticity and limits the risk of the front stop tearing off in the event of strong impacts. The weight per foot is 565g, and the compensation system is available for the entire KARIBOU range.

*The offer is valid from 15/09/2023 to 31/01/2024, in accordance with the brand's conditions, by following this link: Conditions prime à la fixe.

The form is available here : Information form

Please note that the offer is valid directly with the brand PLUM for the purchase of a binding at Alpinstore. All requests for reimbursement of the fixed price premium must be made directly via the brand PLUM.

Benefits

• Optimized comfort and skiability thanks to features such as automatic ski stop, pole-handling wedges and high release values.
• Improved ski flex at high compressions thanks to our patented system incorporating elasticity in the front stop.
• Robust construction with high-quality materials such as 7075 aluminum and hardened steel, guaranteeing exceptional durability and performance.

Technical features

• Comfort on the way up and skiability on the way down thanks to automatic ski stop and pole-operated wedges
• Patented system offering 12mm of total elasticity to improve ski flexion in high compression situations
• Optimal stop/heel weight balance and better elasticity distribution
• 35 mm adjustment rail and 565g/foot weight
• Wide center distances, integrated heel wedge and front riser plate
• High release values (DIN up to 12) for strong touring and resort skiing
• 7075 aluminum construction with hardened steel front insert and POM plastic heel retainer body
• Integrated knife holders and three wedge heights (0 mm - 59 mm - 84 mm)

Hybrid freerando binding with climbing and descending performance

The DUKE PT 16 100MM freerando binding from Marker combines performance and ease of use. This hybrid model combines a Ride & Hike front stop with an Inter Pivot 3 Freeride heel.

The 100mm Lock & Walk brakes offer a neutral walking mode with a 10° ascent wedge. Sole ID technology makes this binding compatible with alpine, touring or GripWalk soles.

Benefits

• Auto-Quad Lock technology: automatic 4-point locking for optimum downhill performance.
• Lock & Walk brakes: neutral walking mode and 10° ascent aid for easier ascent.
• Sole ID: full compatibility with A/T/GW soles for maximum versatility.

Technical features

• Lock & Walk Brake: brake lock with neutral walk mode and 10° climbing aid
• Auto-Quad Lock: automatic locking in Ride mode at 4 different points
• Ride & Hike Stop: Royal Family downhill performance with Pin technology for climbing
• Inter Pivot 3 Freeride Heel: latest-generation heel piece with enhanced performance
• Anti Ice Rail: metal edge to remove ice from the bottom of the boot
• Sole ID: compatible with A/T/GW soles
• Height: 24 mm
• DIN: 6 - 16
• Stop-ski: 100 mm ski brake width

Ultra-light touring binding for optimal speed touring performance

The Haute Route 10 PLUS embodies ski touring excellence in a lightweight, high-performance binding weighing less than 220 grams. Made from aluminum, it features the CAM Release System for easy donning and remarkable torsional rigidity, ideal for Speed Touring.

The Speed Toe Piece optimizes descent thanks to its hybrid design and Snowpack Proof system. Magneto heel pads offer comfort and maneuverability. True to its roots, ATK combines lightness and durability for exceptional mountain performance.

Benefits

• Exceptional lightness: At less than 220 grams, Haute Route PLUS is the lightest ATK binding, ideal for Speed Touring.
• Optimized performance: The Cam Release system and Speed Toe Piece guarantee outstanding power transmission and torsional rigidity.
• Assured durability: Made from high-quality aluminum, it withstands the rigors of ski touring for carefree adventures.

Technical specifications

• Weight: 220 grams
• Materials: Alu 7075, POM, Stainless steel
• Trigger range: 4-10
• Walking modes: Flat | +35mm | +38mm | +56mm | +59mm
• Boot size adjustment: 30 mm
• Ski braking system: None
• Ideal fit: Ski width 80 - 97mm, Ski weight 900 - 1500g, Skier weight 40 - 85kg

Touring ski bindings for beginners: performance and lightness at their best

The Candy 5 binding from ATK is ideal for beginners and light users, offering comfort, control and reliability. Its fiberglass composite tip prevents snow accumulation, guaranteeing optimal performance.

With the patented Cam Release system and Snowpack Proof, the Candy 5 ensures easy donning and great durability. Perfect for those looking for lightness and performance in ski-mountaineering.

Features

• Lightweight, durable design, ideal for ski touring beginners.
• Cam Release and Snowpack Proof systems for precise control and effortless use.
• Flexible adjustment with up to 50 mm of length adjustment for optimum comfort.

Technical features

• Composite fiberglass toe cap to prevent snow debris.
• Cam Release system for easy donning and torsional rigidity.
• Elastic response system for precise release.
• Length adjustment up to 50 mm.
• Adjustable lateral and vertical release values.
• 102mm compatible
• Snowpack Proof system to prevent snow accumulation.
• Easy Entry System for quick and easy entry.
• Integrated, removable ramp support.

Lightweight, versatile touring binding for fast, secure donning

The PIKA binding is ideal for hikers looking for lightness and versatility, with an adjustable release from 4 to 10, two wedge heights that can be manipulated with the pole, and a removable stopper.

Equipped with PLUM "Too easy" technology, it ensures rapid donning and doffing. Its aluminum and hardened steel construction guarantees durability, while the lightweight stopper is available in several widths.

Benefits

• Lightweight and versatile: lightweight touring binding with comprehensive options, including a removable stopper in 4 widths.
• Quick on/off: PLUM "Too easy" technology for easy on/off thanks to tightened inserts.
• Adjustable safety: Adjustable side and front release from 4 to 10 for customized safety.

Technical features

• Adjustable side and front release: 4 to 10
• 2 rise wedge positions: 0 mm - 50 mm
• Removable stopper: 90mm
• Adjustment rail: 20 mm (approx. 3 sizes)
• Removable knife holder included

Ultra-light touring binding for optimum safety and comfort

The OAZO 6 binding from PLUM is the epitome of ski touring, offering lightweight comfort without compromising safety. It offers adjustable side release (DIN 4-10) and fixed 6 front release, weighing just 200g per foot.

Versatile, it includes three shim heights, a 25 mm adjustable rail, and removable knife holders. Compatible with various accessories such as light ski-stops and leashes, it comes with a five-year warranty.

Features

• Ultra-light at 200g per foot, the OAZO 6 binding ensures safety with adjustable side release (DIN 4-10) and fixed front release at 6.
• Versatile with 3 shim heights, 25 mm adjustment rail, and removable knife holder compatible with PLUM.
• Compatible with practical options: removable ski stop, leash, heel hold; 5-year warranty for peace of mind.

Technical specifications

• Weight per foot: 200g
• Adjustable side release (DIN 4-10)
• Fixed front release at DIN 6
• 3 shim heights: 0, 40, and 54 mm
• 25 mm adjustment rail (approx. 3 sizes)
• Removable knife holder PLUM included
• Compatible with lightweight, removable ski stop, leash and heel wedge
• Aluminum and hardened steel construction for durability
• 90mm stopper

Lightweight, versatile touring binding for fast, secure donning

The PIKA binding is ideal for hikers looking for lightness and versatility, with an adjustable release from 4 to 10, two wedge heights that can be manipulated with the pole, and a removable stopper.

Equipped with PLUM "Too easy" technology, it ensures rapid donning and doffing. Its aluminum and hardened steel construction guarantees durability, while the lightweight stopper is available in several widths.

Benefits

• Lightweight and versatile: lightweight touring binding with comprehensive options, including a removable stopper in 4 widths.
• Quick on/off: PLUM "Too easy" technology for easy on/off thanks to tightened inserts.
• Adjustable safety: Adjustable side and front release from 4 to 10 for customized safety.

Technical features

• Adjustable side and front release: 4 to 10
• 2 rise wedge positions: 0 mm - 50 mm
• Removable stopper: 110mm
• Adjustment rail: 20 mm (approx. 3 sizes)
• Removable knife holder included